Defogger
Driver side door mirror defogger
In this manual: Defogger
~1min read
Description
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror from fogging up.
Component Function Check
1.CHECK DRIVER SIDE DOOR MIRROR DEFOGGER 1. Perform IPDM E/R Active Test (“REAR DEFOGGER”) using CONSULT-III. 2. Touch “ON”.3. Check that the driver side door mirror glass is getting warmer.
Is the inspection result normal? YES >> Driver side door mirror defogger is OK.
NO >> Refer to DEF-35, "Diagnosis Procedure"
Diagnosis Procedure
1.CHECK POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect door mirror (driver side) connector. 3. Turn ignition switch ON.4. Check voltage between door mirror (driver side) harness connector and ground.

Is the inspection result normal? YES >> GO TO 2.
NO >> Repair or replace harness.
2.CHECK GROUND CIRCUIT 1. Turn ignition switch OFF.2. Check continuity between door mirror (driver side) harness connector and ground.

Is the inspection result normal? YES >> Replace door mirror glass (driver side). Refer to MIR-44, "GLASS MIRROR : Removal and Installation" NO >> Repair or replace harness.
Was this page helpful?