HVAC branch line circuit
3. Check the terminals and connectors of the A/C auto amp. for damage, bend and loose connection (unit side and connector side).
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair the terminal and connector.
2.CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect the connector of A/C auto amp.2. Check the resistance between the A/C auto amp. harness connector terminals.
- 4WD models

- 2WD models

Is the measurement value within the specification? YES >> GO TO 3.
NO >> Repair the A/C auto amp. branch line.
3.CHECK POWER SUPPLY AND GROUND CIRCUITCheck the power supply and the ground circuit of the A/C auto amp. Refer to the following.
• 4WD models: HAC-73, "A/C AUTO AMP. : Diagnosis Procedure" • 2WD models: HAC-162, "A/C AUTO AMP. : Diagnosis Procedure"
Is the inspection result normal? YES (Present error)>>Replace the A/C auto amp. Refer to the following.
• 4WD models: HAC-91, "Removal and Installation" • 2WD models: HAC-188, "Removal and Installation"
YES (Past error)>>Error was detected in the A/C auto amp. branch line.
NO >> Repair the power supply and the ground circuit.