TCM branch line circuit
3. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side).
- TCM - Harness connecotor F1
- Harness connecotor E8
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair the terminal and connector.
2.CHECK HARNESS FOR OPEN CIRCUIT 1. Disconnect the connector of TCM.2. Check the resistance between the TCM harness connector terminals.
- HR16DE models

- MR16DDT models

Is the measurement value within the specification? YES >> GO TO 3.
NO >> Repair the TCM branch line.
3.CHECK POWER SUPPLY AND GROUND CIRCUITCheck the power supply and the ground circuit of the TCM. Refer to the following.
• HR16DE: TM-464, "Diagnosis Procedure" • MR16DDT: TM-239, "Diagnosis Procedure"
Is the inspection result normal? YES (Present error)>>Replace the TCM. Refer to the following.
• HR16DE: TM-490, "Removal and Installation" • MR16DDT: TM-280, "Removal and Installation"
YES (Past error)>>Error was detected in the TCM branch line.
NO >> Repair the power supply and the ground circuit.