Engine Cooling System MR16DDT
Inspection
In this manual: Engine Cooling System MR16DDT
~1min read
LEVEL
• Check that the reservoir tank engine coolant level is within the “MIN” to “MAX” when the engine is cool.
A : MAX
B : MIN
• Adjust the engine coolant level if necessary.

LEAKAGE
• To check for leakage, apply pressure to the cooling system with the radiator cap tester (commercial service tool) (A) and the radiator cap tester adapter (commercial service tool) (B).
Testing pressure: Refer to CO-29, "Radiator".
WARNING:Never remove radiator cap when engine is hot. Serious burns may occur from high-pressure engine coolant escaping from radiator. CAUTION:
Higher test pressure than specified may cause radiator damage. NOTE:
In a case that engine coolant decreases, replenish radiator with engine coolant.
• If anything is found, repair or replace damaged parts.

Was this page helpful?