Instruments and controls

Map light control switch (if so equipped)

~1min read
The map lights control switch has three positions: ON1 , OFF2 and center.

The map lights control switch has three positions: ON1 , OFF2 and center.

ON position

When the switch is in the ON position 1 , the map lights will illuminate.

OFF position

When the switch is in the OFF position2 , the map lights will not illuminate, regardless of the condition.

Center position

When the switch is in the center position, the map lights will illuminate under the following conditions:

• ignition switch is placed in the OFF position (models with Intelligent Key system)
— remain on for about 15 seconds. • the key is removed from the ignition switch (models without Intelligent Key system) — remain on for about 15 seconds. • doors are unlocked by pushing the UNLOCK button (on the keyfob or Intelligent Key) or the request switch (Intelligent Key system equipped model), with the ignition switch in the LOCK position — remain on for about 15 seconds. • any door is opened and then closed with the ignition switch in the LOCK position
— remain on for about 15 seconds.

• any door is opened with the ignition switch in the ACC or ON position — remain on while the door is opened.

When the door is closed, the lights go off.

The lights will turn off after a period of time when the lights remain illuminated to prevent the battery from becoming discharged.