Heater & Air Conditioning Control System Type 1

Operation inspection

In this manual: Heater & Air Conditioning Control System Type 1
Foreword — 1General information — 45Engine Mechanical MR16DDT — 61Engine Mechanical HR16DE — 52Engine Mechanical K9K — 46Engine Lubrication System MR16DDT — 18Engine Lubrication System HR16DE — 14Engine Lubrication System K9K — 11Engine Cooling System MR16DDT — 28Engine Cooling System HR16DE — 29Engine Cooling System K9K — 24Engine Control System MR16DDT — 163Engine Control System HR16DE — 115Engine Control System K9K — 129Fuel System MR16DDT — 13Fuel system HR16DE — 11Fuel system K9K — 12Exhaust system MR16DDT — 7Exhaust system HR16DE — 10Exhaust system K9K — 7Starting system — 24Accelerator control system — 6Clutch — 25Driveline transfer: TY21B — 77Driveline rear propeller Shaft: 3Fφ16-ETJ75 — 12Driveline rear final drive: RTVS — 31Transaxle & transmission 5MT: RS5F92R — 31Transaxle & transmission 6MT: RS6F94R — 30Transaxle & transmission CVT: RE0F10B — 93Transaxle & transmissioN CVT: RE0F11A — 103Front Axle MR16DDT — 18Front Axle HR16DE — 17Front Axle K9K — 17Rear Axle 2WD — 6Rear Axle 4WD — 13Front Suspension — 21Rear Suspension 2WD — 13Rear Suspension 4WD — 17Road Wheels & Tires — 6Brake System LHD — 24Brake System RHD — 24Parking Brake System — 8Brake Control System without ESP — 44Brake Control System with ESP — 63Steering System — 14Steering Control System — 27Seat Belt — 8SRS Airbag — 24SRS Airbag Control System — 93Ventilation System — 11Heater & Air Conditioning System HR16DE — 28Heater & Air Conditioning System MR16DDT — 28Heater & Air Conditioning Control System Type 1 — 49Heater & Air Conditioning Control System Type 2 — 51Heater & Air Conditioning Control System Type 3 — 32Heater & Air Conditioning Control System Type 4 — 40Heater & Air Conditioning Control System Type 5 — 21Interior — 16Instrument Panel — 10Seat — 18Door & Lock Type 1 — 83Door & Lock type 2 — 80Door & Lock type 3 — 65Door & Lock type 4 — 60Security Control System with intelligent key system — 82Security Control System without intelligent key system — 41Glass & Window System — 15Power Window Control System — 28Body Repair — 13Exterior — 20Mirrors — 26Exterior Lighting System Halogen type — 51Interior Lighting System — 24Wiper & Washer — 45Defogger — 31Horn — 4Power Outlet — 4Body Control System With intelligent key system — 21Body Control System Without intelligent key system — 23LAN system can fundamental — 6LAN system can — 31LAN System can system (type 1) — 1LAN System can system (type 2) — 1LAN System can system (type 3) — 1LAN System can system (type 4) — 1LAN System can system (type 5) — 1LAN System can system (type 6) — 1LAN System can system (type 7) — 2LAN System can system (type 8) — 1LAN System can system (type 9) — 1LAN System can system (type 10) — 1LAN System can system (type 11) — 1Power Control System IPDM E/R (with I-key) — 14Power Control System IPDM E/R (without I-key) — 14Power Control System Power distribution system — 25Charging System — 22Power Supply, Ground & Circuit Elements — 20Meter, Warning Lamp & Indicator — 33Warning Chime System — 22Audio, Visual & Navigation System Audio without navigation — 30Audio, Visual & Navigation System Audio with navigation — 33Audio, Visual & Navigation System NISSAN dynamic control system — 22Cruise Control System — 1Drive Mode System — 10Maintenance — 14
~3min read
Work Procedure

The purpose of the operational check is to check that the individual system operates normally.

Check condition : Engine running at normal operating temperature.

1.CHECK MEMORY FUNCTION 1. Set temperature to 30 °C by operating the temperature control dial. 2. Press OFF switch. 3. Turn ignition switch OFF. 4. Turn ignition switch ON. 5. Press AUTO switch.

6. Check that set temperature is maintained.

Is the inspection result normal? YES >> GO TO 2.

NO >> GO TO 10.

2.CHECK AIR FLOW 1. Start engine. 2. Operate fan control dial.

3. Check that air flow changes. Check operation for all fan speeds.

Is the inspection result normal? YES >> GO TO 3.

NO >> GO TO 10.

3.CHECK AIR OUTLET 1. Operate fan control dial to set the fan speed to maximum speed. 2. Operate MODE switch and DEF switch.

3. Check that air outlets change according to each indicated air outlet by placing a hand in front of the air outlets. Refer to VTL-5, "System Description".

Is the inspection result normal? YES >> GO TO 4.

NO >> GO TO 10.

4.CHECK AIR INLET 1. Press intake switch to set the air inlet to recirculation. [Intake switch indicator ( 2. Listen to intake sound and confirm air inlets change.side) turns ON.]
2. Listen to intake sound and confirm air inlets change.

3. Press intake switch again to set the air inlet to fresh air intake. [Intake switch indicator ( OFF and ( side) turns ON.]side) turns
OFF and ( 4. Listen to intake sound and confirm air inlets change.side) turns ON.]
4. Listen to intake sound and confirm air inlets change.

Is the inspection result normal? YES >> GO TO 5.

NO >> GO TO 10.

5.CHECK COMPRESSOR 1. Press A/C switch. The A/C switch indicator is turns ON. 2. Check visually and by sound that the compressor operates. 3. Press A/C switch again The A/C switch indicator is turns OFF.

4. Check that compressor stops.

Is the inspection result normal? YES >> GO TO 6.

NO >> GO TO 10.

6.CHECK DISCHARGE AIR TEMPERATURE 1. Operate temperature control dial.

2. Check that discharge air temperature changes.

Is the inspection result normal? YES >> GO TO 7.

NO >> GO TO 10.

7.CHECK TEMPERATURE DECREASE 1. Operate compressor. 2. Operate temperature control dial and lower the set temperature to 16 °C.

3. Check that cool air blows from the air outlets.

Is the inspection result normal? YES >> GO TO 8.

NO >> GO TO 10.

8.CHECK TEMPERATURE INCREASE 1. Operate temperature control dial and raise the set temperature to 30 °C.

2. Check that warm air blows from the air outlets.

Is the inspection result normal? YES >> GO TO 9.

NO >> GO TO 10.

9.CHECK AUTO MODE 1. Press AUTO switch to confirm that “AUTO” is indicated on the display.

2. Operate temperature control dial to check that air outlet or air flow changes (the air outlet or air flow varies depending on the ambient temperature, in-vehicle temperature, set temperature, and etc.).

Is the inspection result normal? YES >> INSPECTION END

NO >> GO TO 10.

10.CHECK SELF-DIAGNOSIS WITH CONSULT-III 1. Perform self-diagnosis with CONSULT-III.

2. Check that any DTC is detected.

Is any DTC detected? YES >> Refer to HAC-39, "DTC Index" and perform the appropriate diagnosis.

NO >> GO TO 11.

11.CHECK FAIL-SAFE ACTIVATION

Check that symptom is applied to the fail-safe activation. Refer to HAC-39, "Fail-safe".

>> Refer to HAC-84, "Symptom Table" and perform the appropriate diagnosis.