Warning Chime System
Power supply and ground circuit
In this manual: Warning Chime System
~1min read
Combination meter COMBINATION METER : Diagnosis Procedure 1.CHECK FUSE



Check for blown fuses.

Is the inspection result normal? YES >> GO TO 2.
NO >> Be sure to eliminate cause of malfunction before installing new fuse.
2.CHECK POWER SUPPLY CIRCUITCheck voltage between combination meter harness connector and ground.

Is the inspection result normal? YES >> GO TO 3.
NO >> Check harness between combination meter and fuse.
3.CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect combination meter connector.3. Check continuity between combination meter harness connector and ground.

Is the inspection result normal? YES >> INSPECTION END
NO >> Repair harness or connector.
Was this page helpful?