Audio, Visual & Navigation System NISSAN dynamic control system
Power supply and ground circuit
In this manual: Audio, Visual & Navigation System NISSAN dynamic control system
~1min read
MULTI DISPLAY UNIT MULTI DISPLAY UNIT : Diagnosis Procedure 1.CHECK FUSES



Check if any of the following fuses are blown:

Is the check result normal? YES >> GO TO 2.
NO >> Replace fuse with a new one after repairing the applicable circuit.
2.CHECK POWER SUPPLY CIRCUITCheck voltage between multi display unit harness connector and ground.

Is the check result normal? YES >> GO TO 3.
NO >> Repair harness between fuse and multi display unit.
3.CHECK GROUND CIRCUIT 1. Turn ignition switch OFF. 2. Remove multi display unit connector.3. Check for continuity between multi display unit harness connector and ground.

Is the check result normal? YES >> INSPECTION END
NO >> Repair the harnesses or connectors.
Was this page helpful?