U1000 can comm circuit
Description
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-board multiplex communication line with high data communication speed and excellent error detection ability. A modern vehicle is equipped with many ECUs, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, 2 control units are connected with 2 communication lines (CAN-L-line and CAN-H-line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
Refer to LAN-31, "CAN COMMUNICATION SYSTEM : CAN Communication Signal Chart" for details of the communication signal.
DTC LogicDTC DETECTION LOGIC

Diagnosis Procedure 1.PERFORM SELF-DIAGNOSIS 1. Turn the ignition switch ON and hold it for 2 seconds or more.
2. Using CONSULT-III, check the ”self diagnosis result“ of ”MULTI DISPLAY“.
Is CAN communication system displayed? YES >> Refer to LAN-17, "Trouble Diagnosis Flow Chart".
NO >> Refer to GI-42, "Intermittent Incident".