Heater & Air Conditioning Control System Type 1
Power transistor
In this manual: Heater & Air Conditioning Control System Type 1
~1min read
Exploded View

1. A/C unit assembly 2. Blower fan resistor*1 3. Sub harness*1
4. Power transistor*2
5. Sub harness*2
6. Blower motor
• *1: Manual air conditioner • *2: Automatic air conditioner
Removal and Installation
REMOVAL
1. Remove instrument panel assembly. Refer to IP-13, "Removal and Installation". (LHD models) 2. Remove glove box assembly. Refer to IP-13, "Removal and Installation". (RHD models)3. Disconnect power transistor connector.
4. Slide power transistor (1) to the left while pressing lever (A), and then remove power transistor.

INSTALLATION
Install in the reverse order of removal.
Was this page helpful?