Rear Axle 4WD
Rear wheel hub and housing
In this manual: Rear Axle 4WD
~1min read
Inspection
COMPONENT PART
Check the mounting conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal.
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)
Check the following items, and replace the part it necessary.
• Move wheel hub assembly in the axial direction by hand. Check there is no looseness of wheel bearing.
Axial end play : Refer to RAX-24, "Wheel Bearing".
• Rotate wheel hub assembly and check there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub assembly.
Was this page helpful?