Charging System
S terminal circuit
In this manual: Charging System
~1min read
Description
The output voltage of the alternator is controlled by the IC voltage regulator at the “S” terminal detecting the input voltage.
The “S” terminal circuit detects the battery voltage to adjust the alternator output voltage with the IC voltage regulator.
Diagnosis Procedure
1.CHECK “S” TERMINAL CONNECTION 1. Turn ignition switch OFF.2. Check if “S” terminal is clean and tight.
Is the inspection result normal? YES >> GO TO 2.
NO >> Repair “S” terminal connection.
2.CHECK “S” TERMINAL CIRCUITCheck voltage between alternator harness connector and ground

Is the inspection result normal? YES >> Refer to CHG-12, "GASOLINE ENGINE MODELS : Work Flow".
NO >> Check harness for open between alternator and fuse.
Was this page helpful?