Transaxle & transmission 5MT: RS5F92R
Side oil seal
In this manual: Transaxle & transmission 5MT: RS5F92R
~1min read
Removal and Installation
REMOVAL
1. Remove front drive shafts. Refer to FAX-53, "Removal and Installation".2. Remove differential side oil seals (1) from clutch housing and transaxle case, using an oil seal remover.
CAUTION:Never damage transaxle case and clutch housing.
INSTALLATION
Note the following, and install in the reverse order of removal.
• Install differential side oil seals (1) to clutch housing and transaxle case, using the drift [Stamping number: B.vi 1666-B] of the drift set [SST: KV32500QAA].
B : Transaxle case side C : Clutch housing side
Dimension “L1” : 5.7 – 6.3 mm (0.224 – 0.248 in) Dimension “L2” : 2.4 – 3.0 mm (0.094 – 0.118 in)
CAUTION:• Never incline differential side oil seal.
• Never damage clutch housing and transaxle case.

Inspection
INSPECTION AFTER INSTALLATION
Check the oil level and oil leakage. Refer to TM-22, "Inspection".
Was this page helpful?