Engine Mechanical HR16DE
Spark plug
In this manual: Engine Mechanical HR16DE
~1min read
Removal and Installation
REMOVAL
1. Remove ignition coil. Refer to EM-178, "Exploded View".2. Remove spark plug with a spark plug wrench (commercial service tool).
a : 14 mm (0.55 in)
CAUTION:Never drop or shock spark plug.

INSTALLATION
Install in the reverse order of removal.
Inspection
INSPECTION AFTER REMOVAL
Use the standard type spark plug for normal condition.
Spark plug (Standard type) : Refer to EM-251, "Spark Plug".
CAUTION:• Never drop or shock spark plug. • Never use a wire brush for cleaning.
• If plug tip is covered with carbon, spark plug cleaner may be used.
Cleaner air pressure : Less than 588 kPa (6 kg/cm2, 85 psi)
Cleaning time : Less than 20 seconds

Was this page helpful?