Security Control System with intelligent key system
Steering does not lock
In this manual: Security Control System with intelligent key system
~1min read
Description
Steering does not lock when door is open while ignition switch is OFF.
NOTE:
Before performing the diagnosis, check “Work Flow”. Refer to SEC-47, "Work Flow".
Diagnosis Procedure
1.CHECK DOOR SWITCHCheck door switch.
Refer to DLK-87, "Component Function Check" (With super lock) or DLK-258, "Component Function Check" (Without super lock).
Is the inspection normal? YES >> GO TO 2.
NO >> Repair or replace malfunctioning parts.
2.CHECK DETENTION SWITCHCheck CVT shift selector (detention switch). Refer to SEC-83, "Component Inspection".
Is the inspection normal? YES >> GO TO 3.
NO >> Repair or replace malfunctioning parts.
3.CONFIRM THE OPERATIONConfirm the operation again.
Is the inspection normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
NO >> GO TO 1.
Was this page helpful?