Vehicle security system cannot BE set
INTELLIGENT KEY
INTELLIGENT KEY : DescriptionArmed phase is not activated when door is locked using Intelligent Key.
NOTE:
Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDITIONS)” before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITIONS)
“SECURITY ALARM SET”: ON
Check the setting of “SECURITY ALARM SET” in “Work Support” mode of “THEFT ALM” of “BCM” using CONSULT-III.
INTELLIGENT KEY : Diagnosis Procedure 1.CHECK INTELLIGENT KEY SYSTEM (REMOTE KEYLESS ENTRY FUNCTION)Lock/unlock door with Intelligent Key.
Refer to DLK-28, "DOOR LOCK FUNCTION : System Description" (With super lock) or DLK-205, "DOOR LOCK FUNCTION : System Description" (Without super lock).
Is the inspection result normal? YES >> GO TO 2.
NO >> Check Intelligent Key system (remote keyless entry function). Refer to DLK-113, "Diagnosis Procedure" (With super lock) or DLK-279, "Diagnosis Procedure" (Without super lock).
2.CHECK HOOD SWITCHCheck hood switch.
Refer to SEC-155, "Component Function Check".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace hood switch.
3.CONFIRM THE OPERATIONConfirm the operation again.
Is the result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
NO >> GO TO 1.
Door request switch
DOOR REQUEST SWITCH : DescriptionArmed phase is not activated when door is locked using door request switch.
NOTE:
Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDITIONS)” before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITIONS)
“SECURITY ALARM SET”: ON
Check the setting of “SECURITY ALARM SET” in “Work Support” mode of “THEFT ALM” of “BCM” using CONSULT-III.
DOOR REQUEST SWITCH : Diagnosis Procedure 1.CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)Lock/unlock door with door request switch.
Refer to DLK-28, "DOOR LOCK FUNCTION : System Description" (With super lock) or DLK-205, "DOOR LOCK FUNCTION : System Description" (Without super lock).
Is the inspection result normal? YES >> GO TO 2.
NO >> Check Intelligent Key system (door lock function). Refer to DLK-106, "ALL DOOR REQUEST SWITCHES : Diagnosis Procedure" (With super lock) or DLK-272, "ALL DOOR REQUEST SWITCHES : Diagnosis Procedure" (Without super lock).
2.CHECK HOOD SWITCH Check hood switch.
Refer to SEC-155, "Component Function Check".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace hood switch.
3.CONFIRM THE OPERATION Confirm the operation again.
Is the result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
NO >> GO TO 1.
Unlock sensor
UNLOCK SENSOR : DescriptionArmed phase is not activated when door is locked by door key cylinder operation using mechanical key.
NOTE:
Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDITIONS)” before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITIONS)
“SECURITY ALARM SET”: ON
Check the setting of “SECURITY ALARM SET” in “Work Support” mode of “THEFT ALM” of “BCM” using CONSULT-III.
UNLOCK SENSOR : Diagnosis Procedure 1.CHECK DOOR LOCK FUNCTIONLock/unlock door using meahanical key inserted into door key cylinder.
Refer to DLK-24, "System Description" (With super lock), DLK-201, "System Description" (Without super lock).
Is the inspection result normal? YES >> GO TO 2.
NO >> Check Intelligent Key system (remote keyless entry function). Refer to DLK-109, "Diagnosis Procedure" (With super lock) or DLK-275, "Diagnosis Procedure" (Without super lock).
2.CHECK HOOD SWITCHCheck hood switch.
Refer to SEC-155, "Component Function Check".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace hood switch.
3.CONFIRM THE OPERATIONConfirm the operation again.
Is the result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
NO >> GO TO 1.