Steering System
Steering wheel
In this manual: Steering System
~1min read
Exploded View

1. Steering wheel
disassembly.
: N·m (kg-m, ft-lb)
Removal and Installation
REMOVAL
NOTE:
When reconnecting spiral cable, fix cable with a tape so that fixing case and rotating part keep aligned. This will omit neutral position alignment procedure during spiral cable installation.
4. Remove steering wheel with the steering wheel puller (A) (SST: ST27180001)

INSTALLATION
Note the following, and install in the reverse order of removal.
• Check the spiral cable neutral position after replacing or rotating spiral cable. Refer to SR-16, "Removal and Installation".
CAUTION:Never twist spiral cable excessively after it becomes tight. (Twisting may cause the cable to be torn off.)
• Never reuse steering wheel lock nut.
Was this page helpful?