Heater & Air Conditioning Control System Type 1
U1010 control unit (CAN)
In this manual: Heater & Air Conditioning Control System Type 1
~1min read
Description
Initial diagnosis of A/C auto amp.
DTC Logic
DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT-III
1. Turn ignition switch ON. 2. Select “Self Diagnostic Result” mode of “HVAC” using CONSULT-III.
3. Check DTC.
Is DTC detected? YES >> Refer to HAC-52, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis Procedure
1.REPLACE A/C AUTO AMP.Replace A/C auto amp. Refer to HAC-91, "Removal and Installation".
>> INSPECTION END
Was this page helpful?