Heater & Air Conditioning Control System Type 4
U1010 control unit (can)
In this manual: Heater & Air Conditioning Control System Type 4
~1min read
Description
Initial diagnosis of A/C auto amp.
DTC Logic
DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE
1.PERFORM SELF-DIAGNOSIS
With CONSULT-III
1. Turn ignition switch ON.
2. Select “Self Diagnostic Result” mode of “PTC HEATER” using CONSULT-.III 3. Check DTC.
Is DTC detected? YES >> Refer to HAC-276, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis Procedure
1.REPLACE PTC HEATER CONTROL UNITReplace PTC heater control unit.
>> INSPECTION END
Was this page helpful?