Unbalance steering wheel turning force (torque variation)
Description
Unbalance steering wheel turning force (torque variation).
Diagnosis Procedure
1.CHECK THE ILLUMINATION OF THE EPS WARNING LAMPCheck the EPS warning lamp while engine is running.
Does the EPS warning lamp turn OFF? YES >> GO TO 2.
NO >> Refer to STC-28, "Diagnosis Procedure".
2.CHECK STEERING COLUMN AND STEERING GEARCheck the steering column assembly and steering gear assembly.
• Steering column assembly. Refer to ST-10, "Exploded View".• Steering gear assembly. Refer to ST-16, "Exploded View".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace the specific malfunctioning part.
3.CHECK EPS CONTROL UNIT SIGNAL
With CONSULT-III
1. Start the engine.
CAUTION:Never drive the vehicle. 2. Turn steering wheel from full left stop to full right stop. 3. Select “DATA MONITOR” of “EPS” and select “TORQUE SENSOR”.
4. Perform the torque sensor inspection.

Is the inspection result normal? YES >> GO TO 5.
NO >> GO TO 4.
4.CHECK EPS MOTORPerform the trouble diagnosis of EPS motor. Refer to STC-22, "Diagnosis Procedure".
Is the inspection result normal? YES >> GO TO 5.
NO >> Repair or replace the specific malfunctioning part.
5.CHECK STEERING WHEEL TURNING FORCECheck the steering wheel turning force. Refer to ST-8, "Inspection".
Is the inspection result normal? YES >> INSPECTION END
NO >> Check the steering wheel turning force for mechanical malfunction. Refer to ST-21, "Inspection".