Vehicle security system cannot be set
Key fob
KEY FOB : DescriptionArmed phase is not activated when door is locked using keyfob.
NOTE:
Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDITIONS)” before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITIONS)
“SECURITY ALARM SET”: ON
Check the setting of “SECURITY ALARM SET” in “Work Support” mode of “THEFT ALM” of “BCM” using CONSULT-III.
KEY FOB : Diagnosis Procedure 1.CHECK REMOTE KEYLESS ENTRY SYSTEMLock/unlock door with keyfob.
Refer to DLK-366, "REMOTE KEYLESS ENTRY FUNCTION : System Description" (With super lock) or DLK- 497, "System Description" (Without super lock).
Is the inspection result normal? YES >> GO TO 2.
NO >> Check remote keyless entry system. Refer to DLK-418, "Diagnosis Procedure" (With super lock) or DLK-538, "Diagnosis Procedure" (Without super lock).
2.CHECK HOOD SWITCHCheck hood switch.
Refer to SEC-223, "Component Function Check".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace hood switch.
3.CONFIRM THE OPERATIONConfirm the operation again.
Is the result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
NO >> GO TO 1.
Door lock and unlock switch
DOOR LOCK AND UNLOCK SWITCH : DescriptionArmed phase is not activated when door is locked using door lock and unlock switch.
NOTE:
Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDITIONS)” before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITIONS)
“SECURITY ALARM SET”: ON
Check the setting of “SECURITY ALARM SET” in “Work Support” mode of “THEFT ALM” of “BCM” using CONSULT-III.
DOOR LOCK AND UNLOCK SWITCH : Diagnosis Procedure 1.CHECK POWER DOOR LOCK SYSTEM (DOOR LOCK FUNCTION)Lock/unlock door with door lock and unlock switch.
Refer to DLK-363, "System Description" (With super lock) or DLK-494, "System Description" (Without super lock).
Is the inspection result normal? YES >> GO TO 2.
NO >> Check power door lock system (door lock function). Refer to DLK-415, "ALL DOOR : Diagnosis Procedure" (With super lock) or DLK-534, "ALL DOOR : Diagnosis Procedure" (Without super lock).
2.CHECK HOOD SWITCHCheck hood switch.
Refer to SEC-223, "Component Function Check".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace hood switch.
3.CONFIRM THE OPERATIONConfirm the operation again.
Is the result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
NO >> GO TO 1.
Unlock sensor
UNLOCK SENSOR : DescriptionArmed phase is not activated when door is locked by door key cylinder operation using mechanical key.
NOTE:
Check that vehicle is under the condition shown in “CONDITIONS OF VEHICLE (OPERATING CONDITIONS)” before starting diagnosis, and check each symptom.
CONDITION OF VEHICLE (OPERATING CONDITIONS)
“SECURITY ALARM SET”: ON
Check the setting of “SECURITY ALARM SET” in “Work Support” mode of “THEFT ALM” of “BCM” using CONSULT-III.
UNLOCK SENSOR : Diagnosis Procedure 1.CHECK POWER DOOR LOCK SYSTEM (DOOR LOCK FUNCTION)Lock/unlock door using mechanical key inserted into door key cylinder.
Refer to DLK-363, "System Description" (With super lock) or DLK-494, "System Description" (Without super lock).
Is the inspection result normal? YES >> GO TO 2.
NO >> Check power door lock system (door lock function). Refer to DLK-414, "Diagnosis Procedure" (With super lock) or DLK-537, "Diagnosis Procedure" (Without super lock).
2.CHECK HOOD SWITCHCheck hood switch.
Refer to SEC-223, "Component Function Check".
Is the inspection result normal? YES >> GO TO 3.
NO >> Repair or replace hood switch.
3.CONFIRM THE OPERATIONConfirm the operation again.
Is the result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident".
NO >> GO TO 1.