Starting and driving

I-FCW System operation

2steps
~12min
1/5difficulty
Done 0 of 2
Dashboard display indicators showing vehicle detection status and safety system warnings in a Nissan Leaf
  1. Vehicle ahead detection indicator
  2. AEB with Pedestrian Detection system warning light
    Visualization of the I-FCW warning signal and vehicle detection interface on the Nissan Leaf instrument cluster

The I-FCW system is fully active when the Nissan Leaf is traveling at speeds above approximately 5 km/h, ensuring protection during both low-speed city driving and highway cruising.

If the system identifies a potential risk of a forward collision—such as the vehicle ahead braking abruptly—the I-FCW system will immediately notify you by flashing the vehicle ahead detection indicator on your display, supplemented by a distinct audible alert to ensure your attention is drawn to the road ahead.

Turning the I-FCW system on/off

Menu interface on the Nissan Leaf driver information display for managing safety assistance settings

You can manage your safety preferences through the vehicle information display by following these steps:

1. Use the Menu button button to navigate until the "Settings" menu appears. Then, use the Arrow navigation buttons buttons to highlight "Driver Assistance" and press the OK button to confirm.

2. Select "Emergency Brake" from the list and press the OK button.

3. Select "Front" and use the OK button to toggle the system status to ON or OFF.

Please note that whenever the I-FCW system is deactivated, the AEB with Pedestrian Detection system warning light will illuminate to signify that these safety features are currently disabled.

Note: For your safety, the I-FCW system defaults to the ON state every time the EV system is restarted. Furthermore, because the I-FCW system is deeply integrated into the AEB with Pedestrian Detection architecture, there is no separate menu option for the collision warning alone; disabling the AEB system simultaneously turns off the I-FCW system.