Starting and driving

RAB system operation

3steps
~18min
2/5difficulty
Done 0 of 3
Diagram showing the RAB warning light, steering wheel controls, and center display interface in a Nissan Leaf
  1. RAB warning light and dedicated system warning indicator
  2. Steering-wheel-mounted control switches (located on the left side)
  3. Center infotainment and information display

The RAB system is active whenever the shift lever is placed in the R (Reverse) position and the vehicle is traveling at a speed below approximately 15 km/h.

If the system detects an imminent risk of collision with an obstacle while you are reversing, it will provide clear alerts: the RAB system warning indicator will flash on the vehicle information display, a distinct red frame will appear on the center display (specifically for vehicles equipped with the Intelligent Around View Monitor system), and an audible chime will sound three times. Simultaneously, the system will automatically apply the brakes. Following this automated emergency braking event, you must immediately depress the brake pedal yourself to ensure the vehicle remains stationary and to maintain necessary brake pressure.

Note:

  • The vehicle’s brake lights will illuminate automatically when the RAB system performs an emergency stop.
  • You may hear a distinct mechanical noise when the brakes are applied by the system; this is normal operation and does not indicate a system malfunction.

Turning the RAB system on/off

Nissan Leaf dashboard menu path for configuring the Rear Automatic Braking system

To customize the status of the Rear Automatic Braking system, follow these steps using the steering wheel controls:

1. Press the Menu button button repeatedly until the "Settings" menu appears on the vehicle information display, then press the OK button. Navigate using the Arrow buttons buttons to highlight "Driver Assistance," and confirm your choice by pressing OK.

2. Select the "Emergency Brake" option and press the OK button.

3. Select "Rear" and use the OK button to toggle the system between the ON and OFF states.

When you deactivate the RAB system, the corresponding warning light will illuminate to confirm that the feature is currently disabled.

Note: For your continued safety, the RAB system in your Nissan Leaf is configured to turn on automatically every time you restart the EV system.