Safety—Seats, seat belts and supplemental restraint system
Attaching the center seat belt
In this manual: Safety—Seats, seat belts and supplemental restraint system
3steps
~18min
2/5difficulty
Done 0 of 3
Always be sure the center seat belt connector tongue and connector buckle are attached. Disconnect only when folding down the rear seat.
To connect the buckle:
- Pull out the connector tongue from the retractor base
.
- Pull out the seat belt tongue from the retractor base
.
- Pull the seat belt and secure the connector buckle until it clicks
.
The center seat belt connector tongue can be attached only into the rear center seat belt connector buckle.
To fasten the seat belt, refer to "Fastening the seat belts" in this section.
- Do not unfasten the rear center seat belt connector except when folding down the rear seat.
- When attaching the rear center seat belt connector, be certain that the seatbacks are completely secured in the latched position and the rear center seat belt connector is completely secured.
- If the rear center seat belt connector and the seatbacks are not secured in the correct position, serious personal injury may result in an accident or sudden stop.
Was this page helpful?