Ventilation, Heater & Air Conditioner

Automatic Air Conditioning System

~3min read
Diagnosis Chart By Symptom
SymptomCorresponding malfunction partReference
  • Air conditioning does not activate.

  • Air conditioning cannot be controlled.

  • Operation status of air conditioning is not indicated on display.

  • A/C auto amp. ignition power supply circuit

  • A/C control (A/C auto amp.)

Refer to Diagnosis Procedure.
  • Air outlet does not change.

  • Mode door motor does not operate normally.

  • Circuit between mode door motor and A/C auto amp.

  • Mode door motor control linkage

  • Mode door motor

  • A/C auto amp.

Refer to DTC Diagnosis Procedure (B2636), DTC Diagnosis Procedure (B2637), DTC Diagnosis Procedure (B2638), DTC Diagnosis Procedure (B2639), DTC Diagnosis Procedure (B2654), DTC Diagnosis Procedure (B2655).
  • Discharge air temperature of driver side does not change.

  • Air mix door motor LH does not operate normally.

  • Circuit between air mix door motor LH and A/C auto amp.

  • Air mix door motor LH installation condition

  • Air mix door motor LH

  • A/C auto amp.

Refer to DTC Diagnosis Procedure (B2632), DTC Diagnosis Procedure (B2633).
  • Discharge air temperature of passenger side does not change.

  • Air mix door motor RH does not operate normally.

  • Circuit between air mix door motor RH and A/C auto amp.

  • Air mix door motor RH installation condition

  • Air mix door motor RH

  • A/C auto amp.

Refer to DTC Diagnosis Procedure (B2634), DTC Diagnosis Procedure (B2635).
  • Intake door does not change.

  • Intake door motor does not operate normally.

  • Circuit between intake door motor and A/C auto amp.

  • Intake door motor control linkage

  • Intake door motor

  • A/C auto amp.

Refer to DTC Diagnosis Procedure (B263D), DTC Diagnosis Procedure (B263E), DTC Diagnosis Procedure (B263F).
All door motors do not operate normally.
  • Each door motor power supply and ground circuit

  • A/C auto amp.

Refer to Diagnosis Procedure.
Front blower motor operation is malfunctioning.
  • Power supply system of front blower motor

  • Circuit between front blower motor and A/C auto amp.

  • Front blower motor

  • A/C auto amp.

Refer to Diagnosis Procedure.
Compressor does not operate.
  • Circuit between magnet clutch and IPDM E/R

  • Magnet clutch

  • IPDM E/R (A/C relay)

  • Circuit between ECM and refrigerant pressure sensor

  • Refrigerant pressure sensor

  • CAN communication circuit

  • A/C auto amp.

Refer to Diagnosis Procedure.
  • Insufficient cooling.

  • No cool air comes out. (Air flow volume is normal.)

  • Magnet clutch control system

  • Drive belt slipping

  • Refrigerant cycle

  • ECV (electrical control valve)

  • Air leakage from each duct

  • A/C auto amp. connection recognition signal circuit

  • Temperature setting trimmer (front)

Refer to Diagnosis Procedure.
  • Insufficient heating.

  • No warm air comes out. (Air flow volume is normal.)

  • Engine cooling system

  • Heater hose

  • Heater core

  • Air leakage from each duct

  • Temperature setting trimmer (front)

Refer to Diagnosis Procedure.
Noise is heard when front air conditioning system operates. During A/C compressor operation Refrigerant cycle Refer to Symptom Table.
During front blower motor operation
  • Mixing any foreign object in front blower motor

  • Front blower motor fan breakage

  • Front blower motor rotation inferiority

Refer to Component Inspection (Front Blower Motor).
  • Memory function does not operate.

  • Setting temperature is not memorized.

  • Battery power supply system of A/C auto amp.

  • A/C auto amp.

Refer to Diagnosis Procedure.