Body Exterior, Doors, Roof & Vehicle Security
Automatic Back Door Anti-Pinch Function Does Not Operate
In this manual: Body Exterior, Doors, Roof & Vehicle Security
2steps
~12min
1/5difficulty
Done 0 of 2
CHECK POWER SUPPLY AND GROUND CIRCUIT
Check automatic back door control module power supply and ground circuit.
Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK TOUCH SENSOR LH
Check touch sensor LH.
Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK TOUCH SENSOR RH
Check touch sensor RH.
Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
REPLACE AUTOMATIC BACK DOOR CONTROL MODULE
Replace automatic back door control module. Refer to Removal and Installation.
Confirm the operation after replacement.
Is the result normal?
YES>>Inspection End.
NO>>Check intermittent incident. Refer to Intermittent Incident.
Was this page helpful?