Brake Fluid
DRAINING
Turn ignition switch OFF and disconnect ABS actuator and electric unit (control unit) connector or negative battery terminal. Refer to Removal and Installation.
Connect a vinyl tube to bleeder valve.

Depress brake pedal, loosen bleeder valve, and gradually remove brake fluid.
REFILLING
Make sure no foreign material is in the reservoir sub-tank, and refill with new brake fluid.

Refill the brake system as follows:
Depress the brake pedal.
Loosen bleeder valve.
Slowly depress brake pedal to 2/3 of the brake pedal full stroke.
Tighten bleeder valve.
Release brake pedal.
Repeat this operation at intervals of two or three seconds until all old brake fluid is discharged. Add new brake fluid to master cylinder reservoir sub tank frequently.
Bleed the air out of the brake hydraulic system. Refer to Bleeding Brake System.