Do-it-yourself
Checking engine oil level
In this manual: Do-it-yourself
6steps
~36min
2/5difficulty
Done 0 of 6

- Park the vehicle on a level surface and apply the parking brake.
- Start the engine and let it idle until it reaches operating temperature.
- Turn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan.
- Remove the dipstick and wipe it clean. Reinsert it all the way.
- Remove the dipstick again and check the oil level. It should be between the H (High) and L (Low) marks
. This is the normal operating oil level range. If the oil level is below the L (Low) mark
, remove the oil filler cap and pour recommended oil through the opening. Do not overfill
. - Recheck oil level with the dipstick.
It is normal to add some oil between oil maintenance intervals or during the break-in period,dependingonthe severity of operating conditions.
Was this page helpful?