Electrical & Power Control
Component Parts. Charging System
In this manual: Electrical & Power Control
~1min read

| A. | Engine room left side | B. | Combination meter | ||
| No. | Component | Description |
|---|---|---|
| 1. | Generator (IC regulator) | Refer to Generator. |
| 2. | Combination meter (charge warning lamp) | The IC regulator warning function activates to illuminate the charge warning lamp if any of the following symptoms occur while generator is operating: ·Excessive voltage is produced. ·No voltage is produced. Refer to Component Parts Location for detailed component location. |
The generator is located at lower RH side of engine compartment

The IC regulator controls the power generation voltage by the target power generation voltage based on the received power generation command signal. When there is no power generation command signal, the generator performs the normal power generation according to the characteristic of the IC voltage regulator.
Was this page helpful?