Ventilation, Heater & Air Conditioner
Configuration (hvac)
In this manual: Ventilation, Heater & Air Conditioner
~1min read
Vehicle specification needs to be written with CONSULT because it is not written after replacing A/C auto amp.
Configuration has three functions as follows:
| Function | Description |
|---|---|
| READ CONFIGURATION |
|
| WRITE CONFIGURATION - Manual setting | Writes the Nissan Murano vehicle configuration with manual setting. |
| WRITE CONFIGURATION - Config file | Writes the Nissan Murano vehicle configuration with saved data. |
WRITING MODE SELECTION
CONSULT
Select “CONFIGURATION” mode of "HVAC".
When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.
PERFORM “WRITE CONFIGURATION - Config file”
CONSULT
Perform “WRITE CONFIGURATION - Config file”.
>>Work End.
PERFORM “MANUAL CONFIGURATION”
CONSULT
Select “MANUAL CONFIGURATION” to write Nissan Murano vehicle specifications into the A/C auto amp.
>>GO TO 4.
OPERATION CHECK
Confirm that each function controlled by A/C auto amp. operates normally.
>>Work End.
Was this page helpful?