Driver Information & Multimedia

Configuration (sonar Control Unit)

5steps
~30min
3/5difficulty
Done 0 of 5
Description

Vehicle specification needs to be written with CONSULT. Configuration has three functions as follows:

FunctionDescription
"Before Replace ECU"
  • Reads the Nissan Murano vehicle configuration of current sonar control unit.

  • Saves the read vehicle configuration.

"After Replace ECU" Writes the Nissan Murano vehicle configuration with manual selection.
"Select Saved Data List" Writes the Nissan Murano vehicle configuration with saved data.
Work Procedure

WRITING MODE SELECTION

CONSULT

Select “Reprogramming, Configuration” of sonar control unit.

When writing saved data>>

GO TO 2.

When writing manually>>

GO TO 3.

PERFORM “SAVED DATA LIST”

CONSULT

Automatically “Operation Log Selection” window will display if “Before Replace ECU” was performed. Select applicable file from the “Save Data List” and press “Confirm”.

>>

Work End.

PERFORM “AFTER REPLACE ECU” OR “MANUAL CONFIGURATION”

CONSULT

  1. Select “After Replace ECU” or “Manual Configuration”.

  2. Identify the correct model and configuration list. Refer to Configuration List.

  3. Confirm and/or change setting value for each item.

  4. Select “Next”.

  5. When "Completed", select "End".

>>

GO TO 4.

OPERATION CHECK

Confirm that each function controlled by sonar control unit operates normally.

>>

Work End.

Configuration List
MANUAL SETTING ITEM
ItemsSetting value
BCI FUNCTION WITH ⇔ WITHOUT*

⇔: Items which confirm vehicle specifications

*: BCI FUNCTION should always be set to WITHOUT.