Body Exterior, Doors, Roof & Vehicle Security

Diagnosis System (automatic Back Door Control Module)

~3min read
CONSULT Function (AUTO BACK DOOR)

APPLICATION ITEMS

CONSULT performs the following functions via CAN communication with automatic back door control module:

Diagnosis modeFunction Description
Self diagnostic result Displays the diagnosis results judged by automatic back door control module.
Data monitor The automatic back door control module input/output signals are displayed.
Work support Changes the setting for each setting function.
ECU identification The automatic back door control module part number is displayed.
CAN Diag Support Mntr The result of transmit/receive diagnosis of CAN communication is displayed.

SELF DIAGNOSTIC RESULTS

Refer to DTC Index.

DATA MONITOR

Monitor ItemUnitDescription
SPINDLE SENSOR LH [Pulse] Displays the condition of the LH encoder.
SPINDLE LH SPEED [mm/s] Displays the LH spindle operation speed.
SPINDLE MOTOR LH DUTY [%] Displays the condition of the spindle motor LH duty.
VHCL SPEED MTR [km/h] Displays the Nissan Murano vehicle speed signal received from combination meter as a numerical value.
VHCL SPEED ABS [km/h] Displays the Nissan Murano vehicle speed signal received from ABS actuator and electrical unit as a numerical value.
MAIN SW [ON/OFF] Indicates condition of automatic back door main switch.
AUTO BD SW [ON/OFF] Indicates condition of automatic back door switch.
BK DOOR CL SW [ON/OFF] Indicates condition of automatic back door close switch.
BACK DOOR LOCK STATUS [ON/OFF] Indicates condition of back door lock status.
PKB SW [ON/OFF] Indicates condition of parking brake switch.
OPEN SW [ON/OFF] Indicates condition of open switch.
CLOSE SW [ON/OFF] Indicates condition of close switch.
HALF LATCH SW [ON/OFF] Indicates condition of half latch switch.
TOUCH SEN RH [ON/OFF/OPEN] Indicates condition of touch sensor RH.
TOUCH SEN LH [ON/OFF/OPEN] Indicates condition of touch sensor LH.
P RANGE IND [ON/OFF] Indicates condition of P range signal from combination meter.
RKE REQ [OFF/MOVE/REV] Indicates condition of remote keyless entry signal from BCM.
IGN SW [ON/OFF] Indicates condition of IGN power supply.
SPINDLE LH ENCODER A [LO/HI] Indicates condition of encoder signal from encoder A.
SPINDLE LH ENCODER B [LO/HI] Indicates condition of encoder signal from encoder B.
DESTINATION [JPN/NAM] Indicates specification of destination of the automatic back door system.
AUTO BCK DR POS INITIAL [YET/DONE] Indicates condition of calibration of automatic back door position information.
AUTO BCK DR POS LEARN [YET/DONE] Indicates condition of additional service when removing battery negative cable.
SPINDLE SENSOR RH [Pulse] Displays the condition of the RH encoder.
SPINDLE RH SPEED [mm/s] Displays the RH spindle operation speed.
SPINDLE MOTOR RH DUTY [%] Displays the condition of the spindle motor RH duty.
SPINDLE RH ENCODER A [LO/HI] Indicates condition of encoder signal from encoder A.
SPINDLE RH ENCODER B [LO/HI] Indicates condition of encoder signal from encoder B.
TRANSMISSION TYPE [AT/CVT] Indicates type of transmission the Nissan Murano vehicle is equipped with.

WORK SUPPORT

Work itemDescriptionRefer to
RESET AUTO BACK DOOR STATUS This item is for calibration of automatic back door position information. Work Procedure