Cruise Control & Driver Assistance

Ecu Diagnosis Information. Adas Control Unit 2

~15min read
Values on the Diagnosis Tool
Monitor itemConditionValue/Status
MAIN SW Ignition switch ON When MAIN switch is pressed On
When MAIN switch is not pressed Off
SET/COAST SW Ignition switch ON When SET/COAST switch is pressed On
When SET/COAST switch is not pressed Off
CANCEL SW Ignition switch ON When CANCEL switch is pressed On
When CANCEL switch is not pressed Off
RESUME/ACC SW Ignition switch ON When RESUME/ACCELERATE switch is pressed On
When RESUME/ACCELERATE switch is not pressed Off
DISTANCE SW Ignition switch ON When DISTANCE switch is pressed On
When DISTANCE switch is not pressed Off
CRUISE OPE Drive the Nissan Murano vehicle and activate the vehicle-to-vehicle distance control mode When ICC system is controlling On
When ICC system is not controlling Off
BRAKE SW Ignition switch ON When brake pedal is depressed Off
When brake pedal is not depressed On
STOP LAMP SW Ignition switch ON When brake pedal is depressed On
When brake pedal is not depressed Off
IDLE SW Engine running Idling On
Except idling (depress accelerator pedal) Off
VHCL SPEED SE While driving Displays the Nissan Murano vehicle speed calculated by ADAS control unit
ENGINE RPM Engine running Equivalent to tachometer reading
THRTL SENSOR 0.0
BA WARNING Engine running

AEB OFF indicator lamp ON

  • When AEB system is malfunctioning

  • When AEB system is turned to OFF

On

AEB OFF indicator lamp OFF

  • When AEB system is normal

  • When AEB system is turned to ON

Off
STP LMP DRIVE Drive the Nissan Murano vehicle and activate the vehicle-to-vehicle distance control mode When ICC brake hold drive is activated On
When ICC brake hold drive is not activated Off
D RANGE SW Engine running When the shift selector is in “D” position or manual mode On
When the shift selector is in any position other than “D” or manual mode Off
NP RANGE SW Engine running When the shift selector is in “N”, “P” position On
When the shift selector is in any position other than “N”, “P” Off
PKB SW Ignition switch ON When the parking brake is applied On
When the parking brake is released Off
PWR SUP MONI Engine running Power supply voltage value of ADAS control unit
VHCL SPD AT While driving Value of CVT Nissan Murano vehicle speed sensor signal
THRTL OPENING Engine running Depress accelerator pedal Displays the throttle position
GEAR While driving Displays the gear position
MODE SIG Start the engine and press MAIN switch When ICC system is deactivated Off
When Nissan Murano vehicle-to-vehicle distance control mode is activated ICC
When conventional (fixed speed) cruise control mode is activated ASCD
SET DISP IND
  • Drive the Nissan Murano vehicle and activate the conventional (fixed speed) cruise control mode

  • Press SET/COAST switch

SET Nissan Murano vehicle speed indicator ON On
SET Nissan Murano vehicle speed indicator OFF Off
DISTANCE Drive the Nissan Murano vehicle and activate the vehicle-to-vehicle distance control mode When a Nissan Murano vehicle ahead is detected Displays the distance from the preceding Nissan Murano vehicle
When a vehicle ahead is not detected 0.0
RELATIVE SPD Drive the Nissan Murano vehicle and activate the vehicle-to-vehicle distance control mode When a Nissan Murano vehicle ahead is detected Displays the relative speed.
When a Nissan Murano vehicle ahead is not detected 0.0
DYNA ASIST SW Ignition switch ON When dynamic driver assistance switch is pressed On
When dynamic driver assistance switch is not pressed Off
LDW SYSTEM ON Ignition switch ON When the LDW system is ON On
When the LDW system is OFF Off
LDW ON LAMP Ignition switch ON When the LDW system is ON On
When the LDW system is OFF Off
LANE DPRT W/L Drive the Nissan Murano vehicle and activate the LDW system or I–LI system Lane departure warning lamp ON On
Lane departure warning lamp OFF Off
LDW BUZER OUTPUT Drive the Nissan Murano vehicle and activate the LDW/I–LI system or Blind Spot Warning system

When the buzzer of the following system operates

  • LDW/I–LI system

  • Blind Spot Warning system

On

When the buzzer of the following system does not operate

  • LDW/I–LI system

  • Blind Spot Warning

Off
WARN REQ Drive the Nissan Murano vehicle and activate the I–LI system Lane departure warning is operating On
Lane departure warning is not operating Off
Camera lost Drive the Nissan Murano vehicle and activate the LDW system or I–LI system Both side lane markers are detected Detect
Deviate side lane marker is lost Deviate
Both side lane markers are lost Both
Lane unclear While driving Lane marker is unclear On
Lane marker is clear Off
STATUS signal Drive the Nissan Murano vehicle and activate the I–LI system When the I–LI system is ON Stnby
When the I–LI system is operating Warn
When the I–LI system is canceled Cancl
When the I–LI system is OFF Off
Shift position
  • Engine running

  • While driving

Displays the shift position
Turn signal Turn signal lamps OFF Off
Turn signal lamp LH blinking LH
Turn signal lamp RH blinking RH
Turn signal lamp LH and RH blinking LH&RH
SIDE G While driving Nissan Murano Vehicle turning right Negative value
Nissan Murano Vehicle turning left Positive value
FUNC ITEM (FCW) Engine running On
FUNC ITEM (LDW) Engine running On
FUNC ITEM (BSW) Engine running On
LDP SELECT Ignition switch ON “Intelligent Lane Intervention” set with the integral switch is ON On
“Intelligent Lane Intervention” set with the integral switch is OFF Off
FCW SELECT Ignition switch ON “Automatic Emergency Braking” set with the integral switch is ON On
“Automatic Emergency Braking” set with the integral switch is OFF Off
LDW SELECT Ignition switch ON “Lane Departure Warning” set with the integral switch is ON On
“Lane Departure Warning” set with the integral switch is OFF Off
BSW SELECT Ignition switch ON “Blind Spot Warning” set with the integral switch is ON On
“Blind Spot Warning” set with the integral switch is OFF Off
BSW/BSI WARN LMP Engine running When the BSW system is malfunctioning On
When the BSW system is normal Off
BSW SYSTEM ON Ignition switch ON When the BSW system is ON On
When the BSW system is OFF Off
FCW SYSTEM ON Engine running When the AEB system is ON On
When the AEB system is OFF Off
BATTERY CIRCUIT OFF Off
LDP WARNING INDICATOR Engine running When the I-LI system is malfunctioning On
When the I-LI system is normal Off
LDW ON INDICATOR Engine running LDW system display ON On
LDW system display OFF Off
LDW WARNING INDICATOR Engine running When the LDW system is malfunctioning On
When the LDW system is normal Off
SYSTEM CANCEL MESSAGE Engine running When the Nissan Murano vehicle is normal NOREQ
When the wheel is slipping SLIP
When the VDC is OFF VDC OFF
CAMERA HI TEMP MSG Engine running Lane camera unit high temperature warning display ON On
Lane camera unit high temperature warning display OFF Off
ITS SETTING ITEM(LDP) Ignition switch ON On
BSW ON INDICATOR Engine running BSW system display ON On
BSW system display OFF Off
SIDE RADAR BLOCK COND Engine running Front bumper or side radar is dirty On
Front bumper and side radar is clean Off
LDW WARNING ALERT TIMING Ignition switch ON LDW system OFF Nothing
Lane departure warning timing is early setting Early
Lane departure warning timing is late setting Late
BSW IND BRIGHTNESS Ignition switch ON BSW system OFF Nothing
Blind Spot Warning indicator brightness bright Bright
Blind Spot Warning indicator brightness normal Normal
Blind Spot Warning indicator brightness dark Dark
FEB SELECT Power switch ON AEB set with the combination meter is ON On
AEB set with the combination meter is OFF Off
FEB SW Set the Nissan Murano vehicle to READY AEB system ON On
AEB system OFF Off
FEB SW OPE Off
FEB SW IND Off
Reference Value

TERMINAL LAYOUT

PHYSICAL VALUES

Terminal No.

(Wire color)
DescriptionCondition

Value

(Approx.)
+−Signal nameInput/Output

1

(V)
Ground Warning system buzzer drive signal Output Ignition switch ON Warning system buzzer not operating 0 V
Warning system buzzer operating

2

(B)
Ground — Ignition switch ON 0 V

3

(Y)
ITS communication low — — — —

4

(L)
ICC brake hold relay drive signal Output Ignition switch ON — Battery voltage
AT "STOP LAMP" test of "Active Test" 0 V

6

(Y)
ITS communication low — — — —

7

(BR)
Lane intervention switch indicator output Output — — —

9

(L)
CAN high — — — —

12

(L)
Steering vibration motor signal Output Ignition switch ON Operating the steering vibration motor Battery voltage
Not operating the steering vibration motor 0 V

13

(LG)
Driver assistance buzzer drive signal ground Input Ignition switch ON 0 V

15

(L)
ITS communication high — — — —

16

(LG)
Ignition power supply Input Ignition switch ON Battery voltage

18

(L)
ITS communication high — — — —

19

(Y)
CAN low — — — —

20

(L)
CAN high — — — —

21

(P)
CAN low — — — —

23

(LG)
Lane intervention switch Input Ignition switch ON When lane intervention switch is not pressed Battery voltage
When lane intervention switch is pressed 0 V

24

(SB)
Steering vibration motor signal ground Input Ignition switch ON Operating the steering vibration motor 4 V
Not operating the steering vibration motor 0 V
Fail-safe (ADAS Control Unit)

Refer to Fail-safe (ADAS Control Unit).

DTC Inspection Priority Chart

If multiple DTCs are detected simultaneously, check them one by one depending on the following DTC inspection priority chart.

PriorityDetected items (DTC)
1
  • U1507–87: LOST COMM (SIDE RDR R)

  • U1508–87: LOST COMM (SIDE RDR L)

2
  • U1321-55: CONFIG UNFINISHED

  • U1000–01: CAN COMM CIRCUIT

  • U1010–49: CONTROL UNIT (CAN)

3
  • C1B00–97: CAMERA UNIT MALF

  • C1B53–97: SIDE RDR R MALF

  • C1B54–97: SIDE RDR L MALF

  • C1B84–97: DIST SEN MALFUNCTION

4
  • C1A01–A2: POWER SUPPLY CIR

  • C1A02–A3: POWER SUPPLY CIR 2

  • C1A04–97: ABS/TCS/VDC CIRC

  • C1A05–64: BRAKE SW/STOP L SW

  • C1A07–97: CVT

  • C1A0E–49: CONTROL UNIT

  • C1A13–23: STOP LAMP RLY FIX

  • C1A13–24: STOP LAMP RLY FIX

  • C1A14–62: ECM CIRCUIT

  • C1A14–64: ECM CIRCUIT

  • C1A14–97: ECM CIRCUIT

  • C1A17–49: ICC SENSOR

  • C1A1B–14: CONTROL UNIT

  • C1A1C–14: CONTROL UNIT

  • C1A1D–14: CONTROL UNIT

  • C1A1E–14: CONTROL UNIT

  • C1A1F–14: CONTROL UNIT

  • C1A24–97: NP RANGE

  • C1A26–97: ECD MODE MALF

  • C1A27–97: ECD PWR SUPLY CIR

  • C1A33–97: CAN TRANSMISSION ERR

  • C1A34–64: COMMAND ERROR

  • C1A39–97: STRG SEN CIR

  • C1A40–23: SYSTEM SW CIRCUIT

  • C1A41–49: CONTROL UNIT

  • C1A42–23: OPERATION SW CIRC

  • C1A42–62: OPERATION SW CIRC

  • C1A43–23: OPERATION SW CIRC

  • C1B01–55: CAM AIMING INCMP

  • C1B03–48: CAM ABNRML TMP DETCT

  • C1B5D-97: FEB OPE COUNT LIMIT

  • C1B56–97: SONAR CIRCUIT

  • C1B5A-29: G SENSOR MALF

  • C1B82-97: DIST SEN OFF-CENTER

  • C1B85–4B: DIST SEN ABNORMAL TEMP

  • C1B86–A2: DIST SEN PWR SUP CIR

  • C1B88–13: MOTOR CIRCUIT

  • C1B89–13: SPEAKER CIRCUIT

  • U0121–83: VDC CAN CIR 2

  • U0126–82: STRG SEN CAN CIR 1

  • U0155–82 MET CAN CIR1

  • U0235–82: ICC SENSOR CAN CIRC 1

  • U0401–82: ECM CAN CIR 1

  • U0402–82: TCM CAN CIR 1

  • U0415–82: VDC CAN CIR 1

  • U0428–83: STRG SEN CAN CIR 2

  • U0433–83: STRG SEN CAN CIR 2

  • U1500–83: CAM CAN CIR 2

  • U1501–83: CAM CAN CIR 1

  • U1502–08: ICC SEN CAM COMM CIR

  • U1503–83: SIDE RDR L CAN CIR 2

  • U1504–82: SIDE RDR L CAN CIR 1

  • U1505–83: SIDE RDR R CAN CIR 2

  • U1506–82: SIDE RDR R CAN CIR 1

  • U1521–83: SONAR CAN COMMUNICATION 2

  • U1522–82: SONAR CAN COMMUNICATION 1

5
  • C1A03–29: VHCL SPEED SE CIRC

  • C1A03–64: VHCL SPEED SE CIRC

6
  • C1A15–64: GEAR POSITION

7
  • C1A00–44: CONTROL UNIT

  • C1A00–45: CONTROL UNIT

  • C1A00–46: CONTROL UNIT

  • C1A00–48: CONTROL UNIT

  • C1A00–49: CONTROL UNIT

DTC Index
DTCCONSULT displayReference
C1A00 44 CONTROL UNIT Refer to DTC Description.
45 Refer to DTC Description.
46 Refer to DTC Description.
48 Refer to DTC Description.
49 Refer to DTC Description.
C1A01 A2 POWER SUPPLY CIR Refer to DTC Description.
C1A02 A3 POWER SUPPLY CIR 2 Refer to DTC Description.
C1A03 29 VHCL SPEED SE CIRC Refer to DTC Description.
64 Refer to DTC Description
C1A04 97 ABS/TCS/VDC CIRC Refer to DTC Description.
C1A05 64 BRAKE SW/STOP L SW Refer to DTC Description.
C1A07 97 CVT CIRCUIT Refer to DTC Description.
C1A0E 49 CONTROL UNIT Refer to DTC Description.
C1A13 23 STOP LAMP RLY FIX Refer to DTC Description.
24 Refer to DTC Description.
C1A14 62 ECM CIRCUIT Refer to DTC Description.
64 Refer to DTC Description.
97 Refer to DTC Description.
C1A15 64 GEAR POSITION Refer to DTC Description.
C1A17 49 ICC SENSOR Refer to DTC Description.
C1A1B 14 CONTROL UNIT Refer to DTC Description.
C1A1C 14 Refer to DTC Description.
C1A1D 14 Refer to DTC Description.
C1A1E 14 Refer to DTC Description.
C1A1F 14 Refer to DTC Description.
C1A24 97 NP RANGE Refer to DTC Description.
C1A26 97 ECD MODE MALF Refer to DTC Description.
C1A27 97 ECD PWR SUPLY CIR Refer to DTC Description.
C1A33 97 CAN TRANSMISSION ERR Refer to DTC Description.
C1A34 64 COMMAND ERROR Refer to DTC Description.
C1A39 97 STRG SEN CIR Refer to DTC Description.
C1A40 23 SYSTEM SWITCH CIRCUIT Refer to DTC Description.
C1A41 49 CONTROL UNIT Refer to DTC Description.
C1A42 23 OPERATION SW CIRC Refer to DTC Description.
C1A42 62 OPERATION SW CIRC Refer to DTC Description.
C1A43 23 OPERATION SW CIRC Refer to DTC Description.
C1A4A 82 TCM CAN CIRCUIT1 Refer to DTC Description.
C1B00 97 CAMERA UNIT MALF Refer to DTC Description.
C1B01 55 CAM AIMING INCMP Refer to DTC Description.
C1B03 4B CAN ABNRML TMP DETCT Refer to DTC Description.
C1B53 97 SIDE RDR R MALF Refer to DTC Description.
C1B54 97 SIDE RDR L MALF Refer to DTC Description.
C1B56 97 SONAR CIRCUIT Refer to DTC Description.
C1B5A 29 G SENSOR MALF Refer to DTC Description.
C1B5D 97 FEB OPE COUNT LIMIT Refer to DTC Decription.
C1B82 97 DIST SEN OFF-CENTER Refer to DTC Description.
C1B84 97 DIST SEN MALFUNCTION Refer to DTC Description.
C1B85 4B DIST SEN ABNORMAL TEMP Refer to DTC Description.
C1B86 A2 DIST SEN PWR SUP CIR Refer to DTC Description.
C1B88 13 MOTOR CIRCUIT Refer to DTC Description.
C1B89 23 SPEAKER CIRCUIT Refer to DTC Description.
U0121 83 VDC CAN CIR2 Refer to DTC Description.
U0126 82 STRG SEN CAN CIR1 Refer to DTC Description.
U0155 82 METER CAN CIR1 Refer to DTC Description.
U0235 82 ICC SENSOR CAN CIRC1 Refer to DTC Description.
U0401 82 ECM CAN CIR1 Refer to DTC Description.
U0402 82 TCM CAN CIR1 Refer to DTC Description.
U0415 82 VDC CAN CIR1 Refer to DTC Description.
U0428 83 STRG SEN CAN CIR2 Refer to DTC Description.
U0433 83 DIST SEN CAN CIR 2 Refer to DTC Description.
U1000 01 CAN COMM CIRCUIT Refer to DTC Description.
U1010 49 CONTROL UNIT (CAN) Refer to DTC Description.
U1321 55 CONFIGURATION Refer to DTC Description.
U1500 83 CAM CAN CIR 2 Refer to DTC Description.
U1501 82 CAM CAN CIR 1 Refer to DTC Description.
U1502 08 ICC SEN CAN COMM CIR Refer to DTC Description.
U1503 83 SIDE RDR L CAN CIR 2 Refer to DTC Description.
U1504 82 SIDE RDR L CAN CIR 1 Refer to DTC Description.
U1505 83 SIDE RDR R CAN CIR 2 Refer to DTC Description.
U1506 82 SIDE RDR R CAN CIR 1 Refer to DTC Description.
U1507 87 LOST COMM (SIDE RDR R) Refer to DTC Description.
U1508 87 LOST COMM (SIDE RDR L) Refer to DTC Description.
U1521 83 SONAR CAN COMMUNICATION 2 Refer to DTC Description.
U1522 82 SONAR CAN COMMUNICATION 1 Refer to DTC Description.

A system controlling based on a signal received from the control unit performs fail-safe operation when the communication with the ADAS control unit becomes inoperable.