Body Exterior, Doors, Roof & Vehicle Security

Engine Can Not Start

~1min read
Diagnosis Procedure

Engine does not start when ignition switch is pressed.

SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)

Door lock operation (remote keyless entry)Door lock operation (request switch) or back door open operation (opener switch of back door panel)Engine started with push-button ignition switch operation (registered Intelligent Key is within the detection area of inside key antenna)Engine started with push-button ignition switch operation (registered Intelligent Key placed next to push-button ignition switch)
OK OK No start No start

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)

“ENGINE START BY I-KEY” setting in “Work support” mode of “BCM(INTELLIGENT KEY)” is ON.

DIAGNOSIS PROCEDURE

Refer to Diagnosis Procedure.

CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE

Check Intelligent Key system symptom table.

Refer to Diagnosis Procedure.

>>

GO TO 2.

PERFORM SELF DIAGNOSTIC RESULT

CONSULT

Select “Self Diagnostic Result” mode of all systems, and check if DTC is detected.

>>

Follow troubleshooting for each DTC.