Brakes
Front Wheel Sensor
In this manual: Brakes
~1min read

| 1. | Front wheel sensor | A. | Color line (slant line) | B. | Harness connector |
| C. | Refer to Removal and Installation. | Front |
REMOVAL
Remove front wheel and tire using power tool. Refer to Removal and Installation.
Remove fender protector retaining pin to gain access to wheel sensor harness connector.
Disconnect harness connector from front wheel sensor.
Remove front wheel sensor bolt (A) from steering knuckle.

Remove front wheel sensor from strut bracket.
Remove front wheel sensor from body bracket.
Remove front wheel sensor from steering knuckle.
INSTALLATION
Installation is in the reverse order of removal.
For tapered bolt (A), tighten bolt to specification.

Tightening torque : 8 N·m Except for tapered bolt (A), tighten bolt to specification.

Tightening torque : 10 N·m
Was this page helpful?