Hood Lock

| 1. | Hood lock | 2. | Secondary latch | 3. | Hood lock release cable |
| 4. | Hood lock release handle | Clip |
REMOVAL
Remove core support cover. Refer to Exploded View.
Disconnect hood lock release cable and secondary latch cable from hood lock.
Remove bolts, disconnect the harness connector and remove hood lock.
INSTALLATION
Installation is in the reverse order of removal.
Check that secondary latch is properly engaged with secondary striker with hood’s own weight.
While operating hood lock release handle, carefully check that front end of hood assembly is raised by approximately 20.0 mm (0.79 in). Also check that hood lock release handle returns to original position.
Check that hood lock release handle operates at 49 N (5.0 kg-m, 11.0 ft-lb) or below.
Install so that static closing force of hood is 315-490 N (32.1-50.0 kg–m, 70.8-110.2 ft–lb).
Check hood lock lubrication condition. If necessary, apply a suitable multi-purpose grease to hood lock assembly.