Driver Controls
Inside Mirror
In this manual: Driver Controls
~1min read

| 1. | Lane camera bracket | 2. | Lane camera | 3. | Inside mirror |
| 4. | Inside mirror finisher | A. | Bolt | Metal clip | |
| Pawl |
MANUAL ANTI-DAZZLING
| 1. | Windshield glass | 2. | Mirror base | 3. | Inside mirror |
AUTO ANTI-DAZZLING
Removal
Using a suitable tool, release pawls and clips of inside mirror finisher. Refer to Exploded View.
Remove inside mirror finisher.
Disconnect harness connector from inside mirror.
Loosen bolt and slide inside mirror upward to remove.
Installation
Installation is in the reverse order of removal.
MANUAL ANTI-DAZZLING
Removal
Hold inside mirror at base and push upward, while using a suitable tool to release pawl and remove.

Installation
Installation is in the reverse order of removal.
Was this page helpful?