Restraints

Occupant Classification System

~2min read
System Description

SYSTEM DIAGRAM

System Description

The occupant classification system (OCS) identifies different size occupants, out of position occupants, and detects if a child seat is present in the front passenger seat. The OCS control unit (2) receives inputs from the occupant classification system sensors (1) (located inside the passenger seat cushion assembly). Depending on classification of the passenger, the OCS sends a signal to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit uses this signal and the front seat belt buckle switch RH signal to determine deployment or non-deployment of the front passenger air bag module in the event of a collision. Depending on the signals received, the air bag diagnosis sensor unit can disable the front passenger air bag module completely. The OCS (weight sensors) must be set to zero point using CONSULT after servicing the OCS system.

Passenger Air Bag Status Conditions

Front Passenger Seat

(Condition)

PASS AIR BAG OFF Indicator

(Status)

Passenger Air Bag Status

(Readiness)
CONSULT Display
Seat occupied OFF Active (enabled) ON
Seat occupied NOTE ON Deactivated (disabled) OFF
Seat empty ON Deactivated (disabled) OFF