Maintenance
Oil Filter
In this manual: Maintenance
~1min read
REMOVAL
Drain engine oil. Refer to Changing Engine Oil.
Remove front fender protector side cover RH. Refer to Exploded View.
Remove the oil filter using suitable tool (A) as shown.

INSTALLATION
Remove foreign materials adhering to the oil filter installation surface.
Apply clean engine oil to the oil seal contact surface of the new oil filter.

Screw the oil filter manually until it touches the installation surface, then tighten it by turning another 2/3 turn.

| Oil filter | : 17,7 N·m |
Refill the engine with new engine oil. Refer to Changing Engine Oil.
Check the engine oil level and add engine oil as necessary. Refer to Inspection.
After warming up the engine, check for engine oil leaks.
Install front fender protector side cover RH. Refer to Exploded View.
Was this page helpful?