Oil Filter
REMOVAL
Drain engine oil. Refer to Changing Engine Oil.
Remove front fender protector side cover (RH). Refer to Removal and Installation.
Remove the oil filter using suitable tool (A) as shown.

INSTALLATION
Remove foreign materials adhering to the oil filter installation surface.
Apply clean engine oil to the oil seal contact surface of the new oil filter.

Screw the oil filter manually until it touches the installation surface, then tighten it by turning another 2/3 turn or tighten to specification using a suitable tool.

| Oil filter | : 17,7 N·m |
Refill the engine with new engine oil. Refer to Changing Engine Oil.
Check the engine oil level and add engine oil as necessary. Refer to Inspection.
After warming up the engine, check for engine oil leaks.
Install front fender protector side cover (RH). Refer to Removal and Installation.