Electrical & Power Control
Power Socket
In this manual: Electrical & Power Control
~1min read
FRONT CONSOLE POWER SOCKET or REAR CARGO POWER SOCKET
Removal
Remove the fuse for the power socket.
Insert one side of the Tool (A) into one of the square holes inside the power socket.

| Tool number | : — (J-42059) |
Lift up the handle of the Tool until the other side snaps into the other square hole in the power socket.
Pull the power socket straight out with the Tool.
Disconnect the harness connector from the power socket.

Remove the ring from the power socket finisher while pressing the pawls.
Installation
Installation is in the reverse order of removal.

Was this page helpful?