Electrical & Power Control
Push-Button Ignition Switch
In this manual: Electrical & Power Control
~1min read

| 1. | NATS antenna amp. | 2. | Push-button ignition switch |
REMOVAL
Remove the shift selector finisher. Refer to Exploded View.
Release the pawl on each side of the push-button ignition switch (1) and remove from the shift selector finisher (2).

: Pawl
Release the pawl on each side and remove the push-button ignition switch from the NATS antenna amp.
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?