Driver Information & Multimedia

Rear View Camera Image Signal Circuit

19steps
~114min
4/5difficulty
Done 0 of 19
Diagnosis Procedure

CHECK REVERSE INPUT SIGNAL

  1. Ignition switch ON.

  2. Shift the selector lever to R (reverse).

  3. Check voltage between audio unit connector and ground.

    Audio unit Ground Condition

    Voltage

    (Approx.)
    (+) (−)
    Connector Terminal
    M121 8 — Selector lever in R (reverse) Battery Voltage

Is inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace harness or connectors.

CHECK CAMERA POWER SUPPLY CIRCUIT CONTINUITY

  1. Ignition switch OFF.

  2. Disconnect audio unit connector and rear view camera connector.

  3. Check continuity between audio unit connector and rear view camera connector.

    Audio unit Rear view camera Continuity
    Connector Terminal Connector Terminal
    M122 28 D568 2 Yes
  4. Check continuity between audio unit connector and ground.

    Audio unit Ground Continuity
    Connector Terminal
    M122 28 No

Is inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness or connectors.

CHECK CAMERA POWER SUPPLY VOLTAGE

  1. Connect audio unit connector and rear view camera connector.

  2. Ignition switch ON.

  3. Shift the selector lever to R (reverse).

  4. Check voltage between audio unit connector and ground.

    Audio unit Ground Condition

    Voltage

    (Approx.)
    (+) (−)
    Connector Terminal
    M122 28 — Selector lever is in “R”. 6.0 V

Is inspection result normal?

YES>>

GO TO 4.

NO>>

Replace audio unit. Refer to Removal and Installation.

CHECK CAMERA IMAGE SIGNAL CIRCUIT CONTINUITY

  1. Ignition switch OFF.

  2. Disconnect audio unit connector and rear view camera connector.

  3. Check continuity between audio unit connector and rear view camera connector.

    Audio unit Rear view camera Continuity
    Connector Terminal Connector Terminal
    M122 49 D568 4 Yes
  4. Check continuity between audio unit connector and ground.

    Audio unit Ground Continuity
    Connector Terminal
    M122 49 No

Is inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace harness or connectors.

CHECK CAMERA GROUND CIRCUIT CONTINUITY

Check continuity between audio unit connector and rear view camera connector.

Audio unit Rear view camera Continuity
Connector Terminal Connector Terminal
M122 29 D568 1 Yes

Is inspection result normal?

YES>>

GO TO 6.

NO>>

Repair or replace harness or connectors.

CHECK CAMERA IMAGE SIGNAL

  1. Connect audio unit connector and rear view camera connector.

  2. Ignition switch ON.

  3. Shift the selector lever to R (reverse).

  4. Check signal between audio unit connector and ground.

    Audio unitGroundConditionReference value
    (+)(−)
    ConnectorTerminal
    M122 49 — Camera image displayed.

Is inspection result normal?

YES>>

Replace audio unit. Refer to Removal and Installation.

NO>>

Replace rear view camera. Refer to Removal and Installation.