Driver Controls

Rear Window Defogger Relay

5steps
~30min
2/5difficulty
Done 0 of 5
Component Function Check

CHECK REAR WINDOW DEFOGGER RELAY POWER SUPPLY CIRCUIT

Check that an operation noise of rear window defogger relay [located in fuse block (J/B)] can be heard when turning the rear window defogger switch ON.

Is the inspection result normal?

YES>>

Rear window defogger relay power supply circuit is OK.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK REAR WINDOW DEFOGGER RELAY GROUND CIRCUIT

  1. Ignition switch ON.

  2. Check voltage between BCM connector and ground.

    (+)(–)Condition

    Voltage

    (Approx.)
    BCM
    ConnectorTerminal
    M19 61 Ground Rear window defogger switch ON 0 V
    OFF Battery voltage

Is the inspection result normal?

YES>>

Rear window defogger power supply circuit is OK.

NO>>

GO TO 2.

CHECK HARNESS CONTINUITY

  1. Ignition switch OFF.

  2. Disconnect BCM connector and fuse block (J/B) connector.

  3. Check continuity between BCM harness connector and fuse block (J/B) harness connector.

    BCMFuse block (J/B)Continuity
    ConnectorTerminalConnectorTerminal
    M19 61 M4 6P Yes

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness.

CHECK REAR WINDOW DEFOGGER RELAY

Check rear window defogger relay. Refer to Component Inspection.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Replace rear window defogger relay.

Component Inspection

CHECK REAR WINDOW DEFOGGER RELAY

Check rear window defogger relay.

Rear window defogger relayConditionContinuity
Terminal
3 5 12 V direct current supply between terminals 1 and 2 Yes
No current supply No

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace rear window defogger relay.