Do-it-yourself
Replacing
In this manual: Do-it-yourself
6steps
~36min
2/5difficulty
Done 0 of 6

Replace the wiper blades if they are worn. To replace the windshield wiper blades, follow the procedure below:
- Lift the wiper arm away from the windshield.
- Lift the release tab
. - Move the wiper blade
down and remove. - Insert the new wiper blade onto the wiper arm.
- Push the release tabdownuntil it clicks.
- Push wiper on to windshield.
- After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened.
- Make sure the wiper blades contact the glass; otherwise the arms may be damaged from wind pressure.

If you wax the surface of the hood, be careful not to let wax get into the washer nozzle
. This may cause clogging or improper windshield-washer operation. If wax gets into the nozzle, remove it with a needle or small pin
.
Rear window wiper blade
It is recommended that you visit a NISSAN dealer if checking or replacement is required.
Was this page helpful?