Second Row Seats
LH SEAT — With Heated Seats
| 1. | Seatback board | 2. | Seat cushion trim | 3. | Seat cushion pad (with heated seats) |
| 4. | Seat cushion link cover (RH) | 5. | Seat cushion hinge cover | 6. | Seat cushion frame |
| 7. | Seat cushion link cover (LH) | 8. | LATCH bracket | 9. | Seat harness (LH) |
| 10. | Reclining device inner cover (LH) | 11. | Reclining device connecting rod | 12. | Reclining device assembly |
| 13. | Seat bracket | 14. | Reclining device outer cover (LH) | 15. | Pull strap |
| 16. | Recline release cable assembly | 17. | Headrest | 18. | Seatback assembly |
| 19. | Headrest holder (free) | 20. | Headrest holder (locked) | 21. | Reclining device inner cover (RH) |
| 22. | Reclining device outer cover (RH) | A. | Refer to Removal and Installation. | B. | Grommet |
| Clip | Pawl |
LH SEAT — Without Heated Seats
| 1. | Seatback board | 2. | Seat cushion trim | 3. | Seat cushion pad (without heated seats) |
| 4. | Seat cushion link cover (RH) | 5. | Seat cushion hinge cover | 6. | Seat cushion frame |
| 7. | Seat cushion link cover (LH) | 8. | LATCH bracket | 9. | Seat harness (LH) |
| 10. | Reclining device inner cover (LH) | 11. | Reclining device connecting rod | 12. | Reclining device assembly |
| 13. | Seat bracket | 14. | Reclining device outer cover (LH) | 15. | Pull strap |
| 16. | Recline release cable assembly | 17. | Headrest | 18. | Seatback assembly |
| 19. | Headrest holder (free) | 20. | Headrest holder (locked) | 21. | Reclining device inner cover (RH) |
| 22. | Reclining device outer cover (RH) | A. | Refer to Removal and Installation. | B. | Grommet |
| Clip | Pawl |
RH SEAT — WITH HEATED SEATES
| 1. | Headrest (center) | 2. | Headrest (RH) | 3. | Headrest holder (free) |
| 4. | Headrest holder (locked) | 5. | Seatback assembly | 6. | Dampener |
| 7. | Reclining device inner finisher (RH) | 8. | Reclining device outer finisher (RH) | 9. | Recline release cable assembly |
| 10. | Reclining device assembly | 11. | Pull strap | 12. | Reclining device outer cover (LH) |
| 13. | Seat cushion link cover (RH) | 14. | Seat bracket | 15. | Seat cushion pad (with heated seats) |
| 16. | Seat cushion trim | 17. | Seat cushion hinge cover | 18. | Seat cushion frame |
| 19. | Seat cushion link cover (LH) | 20. | LATCH bracket | 21. | Reclining device inner finisher (LH) |
| 22. | Armrest bracket outer finisher (LH) | 23. | Armrest outer bracket | 24. | Armrest bracket inner finisher (LH) |
| 25. | Armrest assembly | 26. | Cup holder | 27. | Armrest bracket finisher (RH) |
| 28. | Armrest inner bracket | 29. | Seat harness | 30. | Seatback board |
| A. | Refer to Removal and Installation. | Clip | Pawl |
RH SEAT — WITHOUT HEATED SEATES
| 1. | Headrest (center) | 2. | Headrest (RH) | 3. | Headrest holder (free) |
| 4. | Headrest holder (locked) | 5. | Seatback assembly | 6. | Dampener |
| 7. | Reclining device inner finisher (RH) | 8. | Reclining device outer finisher (RH) | 9. | Recline release cable assembly |
| 10. | Reclining device assembly | 11. | Pull strap | 12. | Reclining device outer cover (LH) |
| 13. | Seat cushion link cover (RH) | 14. | Seat bracket | 15. | Seat cushion pad (without heated seats) |
| 16. | Seat cushion trim | 17. | Seat cushion hinge cover | 18. | Seat cushion frame |
| 19. | Seat cushion link cover (LH) | 20. | LATCH bracket | 21. | Reclining device inner finisher (LH) |
| 22. | Armrest bracket outer finisher (LH) | 23. | Armrest outer bracket | 24. | Armrest bracket inner finisher (LH) |
| 25. | Armrest assembly | 26. | Cup holder | 27. | Armrest bracket finisher (RH) |
| 28. | Armrest inner bracket | 29. | Seat harness | 30. | Seatback board |
| A. | Refer to Removal and Installation. | Clip | Pawl |
REMOVAL
Remove headrests.
Remove seat cushion hinge covers (LH/RH).Slide seat cushion hinge covers upward (1) to release pawls.

: Pawl
Remove two seat front bolts (A).

Lift and support rear seat cushion assembly using a suitable tool then remove bolt (B).
Adjust rear seat to fold flat position then remove seat rear bolts (A) and nut (B).

Disconnect negative and positive battery terminals then wait at least three minutes. Refer to Removal and Installation.
Disconnect harness connector for side air bag module.
Disconnect harness connectors from seat (LH) cushion heater (if equipped).
Release recline release cable from reclining device and remove seat.
INSTALLATION
Installation is in the reverse order of removal.
REMOVAL
Adjust rear seat (LH) to the fold flat position.
Release pawls and remove armrest bracket outer finisher.

: Pawl
Remove bolt (A) and nuts (B), then remove armrest outer bracket (1).

Remove armrest assembly.
INSTALLATION
Installation is in the reverse order of removal.
REMOVAL
Remove rear seat. Refer to Removal and Installation.
Disconnect harness connectors from seat (LH) cushion heater (if equipped) and release harness from attachments.
Release pawls and remove seat cushion link cover (RH/LH).

: Pawl
Remove seat cushion link bolt (RH/LH) (A) and remove seat cushion.

INSTALLATION
Installation is in the reverse order of removal.
REMOVAL
Remove luggage side lower finisher. Refer to Removal and Installation (LH) or Removal and Installation (RH).
Remove nuts (A) and recline release cable assembly (1).

: Front
Remove recline release cable (1) from clips (A).

: Front
Remove recline release cable assembly (2) from rear seat (LH) recline device assembly (1).

: Front
INSTALLATION
Installation is in the reverse order of removal.
REMOVAL
Remove center console tray mat. Refer to Exploded View.
Remove screw and release clips then remove center console tray.
Remove screws (A) and release clips using a suitable tool then remove center console rear finisher (1).

: Metal clip
Remove screws (A) and release pawls then remove second row heated seat switches (1).

: Pawl
INSTALLATION
Installation is in the reverse order of removal.
REMOVAL and INSTALLATION
Seat Heater - Seat cushion pad
The seat heater and seat cushion pad are serviced as an assembly.
If replacing the seat heater replace the seat cushion pad. Refer to Seat Cushion (LH) or Seat Cushion (RH).
Seat Heater - Seatback pad
The seat heater and seatback pad are serviced as an assembly.
If replacing the seatback heater replace the seat cushion pad. Refer to Seatback (LH) or Seatback (RH).