Body Exterior, Doors, Roof & Vehicle Security
Spindle Unit
In this manual: Body Exterior, Doors, Roof & Vehicle Security
~1min read
REMOVAL
Support back door using a suitable tool.
Remove luggage side upper finisher. Refer to Removal and Installation.
Disconnect the harness connector (A) from the spindle unit.

Remove metal clip (A) from spindle unit upper hinge ball socket (1) using a suitable tool (B) and release spindle unit from spindle unit upper hinge (2).

Remove metal clip from spindle unit lower hinge ball socket using a suitable tool and release spindle unit.
Pull harness through Nissan Murano vehicle body and remove spindle unit.
INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?