Driver Information & Multimedia
Symptom Diagnosis. Intelligent Around View Monitor System
In this manual: Driver Information & Multimedia
~2min read
INTELLIGENT AROUND VIEW MONITOR SYSTEM
| Symptom | Check items | Probable malfunction location | |
|---|---|---|---|
| Screen is not switched to camera image when CAMERA button is pressed or when shift position is shifted to “R”. | “AVM” is not displayed on the system selection screen of CONSULT. | Around view monitor control unit power supply or ground circuit. Refer to Diagnosis Procedure. | |
Check that Data Monitor item values are normal using CONSULT:
|
CAMERA SWITCH SIGNAL and REVERSE SIGNAL are normal. | Around view monitor control unit. Refer to Removal and Installation. | |
| CAMERA SWITCH SIGNAL is not normal. | CAN communication circuit. Refer to Trouble Diagnosis Flow Chart. | ||
| REVERSE SIGNAL is not normal. | Reverse signal circuit. Refer to Reference Value. | ||
|
Check the following Data Monitor item using CONSULT:
|
F-CAMERA IMAGE SIGNAL: NG | Front camera power supply circuit and image signal circuit. Refer to Diagnosis Procedure. |
|
Check the following Data Monitor item using CONSULT:
|
REAR CAMERA IMAGE SIGNAL: NG | Rear camera power supply circuit and image signal circuit. Refer to Diagnosis Procedure. |
| LH side of birds-eye view is not displayed. | Check the following Data Monitor item using CONSULT:
|
DR-SIDE CAMERA IMAGE SIGNAL: NG | Side camera LH power supply circuit and image signal circuit. Refer to Diagnosis Procedure. |
| RH side of birds-eye view is not displayed. | Check the following Data Monitor item using CONSULT:
|
PA-SIDE CAMERA IMAGE SIGNAL: NG | Side camera RH power supply circuit and image signal circuit. Refer to Diagnosis Procedure. |
Was this page helpful?