Brakes

System

~6min read
System Description

SYSTEM DIAGRAM

ADAS CONTROL UNIT INPUT/OUTPUT SIGNAL ITEM

Input Signal Item

Transmit unitSignal nameDescription
ECM CAN communication Closed throttle position signal Receives idle position state (ON/OFF)
Accelerator pedal position signal Receives accelerator pedal position (angle)
Engine speed signal Receives engine speed
Stop lamp switch signal Receives an operational state of the brake pedal
Brake pedal position switch signal Receives an operational state of the brake pedal
TCM CAN communication Input speed signal Receives the number of revolutions of input shaft
Current gear position signal Receives a current gear position
Shift position signal Receives a selector lever position
Output shaft revolution signal Receives the number of revolutions of output shaft
ABS actuator and electric unit (control unit) CAN communication ABS malfunction signal Receives a malfunction state of ABS
ABS operation signal Receives an operational state of ABS
ABS warning lamp signal Receives an ON/OFF state of ABS warning lamp
TCS malfunction signal Receives a malfunction state of TCS
TCS operation signal Receives an operational state of TCS
VDC OFF switch signal Receives an ON/OFF state of VDC
VDC malfunction signal Receives a malfunction state of VDC
VDC operation signal Receives an operational state of VDC
Nissan Murano Vehicle speed signal (ABS) Receives wheel speeds of four wheels
Yaw rate signal Receives yaw rate acting on the Nissan Murano vehicle
Stop lamp switch signal Receives an operational state of the brake pedal
Steering angle sensor CAN communication Steering angle sensor malfunction signal Receives a malfunction state of steering angle sensor
Steering angle sensor signal Receives the number of revolutions, turning direction of the steering wheel
Steering angle speed signal Receives the turning angle speed of the steering wheel
Distance sensor ITS communication Distance sensor signal Receives detection results, such as the presence or absence of a leading Nissan Murano vehicle and distance from the vehicle
Lane camera unit Chassis CAN communication Pedestrian ahead signal Receives detection results of pedestrian ahead of Nissan Murano vehicle
Vehicle ahead signal Receives detection results of Nissan Murano vehicle ahead

Output Signal Item

Reception unitSignal nameDescription
ABS actuator and electric unit (control unit) CAN communication Brake fluid pressure control signal Transmits a brake fluid pressure control signal to activates the brake
Combination meter CAN communication Meter display signal Nissan Murano Vehicle ahead detection indicator signal Transmits a signal to display a state of the system on the information display
AEB/I-FCW system display signal
AEB warning signal
Distance sensor ITS communication Nissan Murano Vehicle speed signal Transmits a vehicle speed calculated by the ADAS control unit
Steering angle sensor signal Transmits a steering angle sensor signal received from the steering angle sensor
Warning buzzer Warning buzzer signal Activates the warning buzzer
ICC brake hold relay ICC brake hold relay drive signal Activates the brake hold relay and turns ON the stop lamp

DESCRIPTION

  • Automatic Emergency Braking (AEB) system can assist the driver when there is a forward collision with the Nissan Murano vehicle ahead in the traveling lane.

  • AEB system operates at speeds above approximately 5 km/h.

  • The AEB system measures the distance from a Nissan Murano vehicle ahead using the distance sensor installed in the front bumper and lane camera unit installed in the windshield glass.

  • The AEB system detects a pedestrian using the lane camera unit installed in the windshield glass.

  • When the system judges that a Nissan Murano vehicle or pedestrian is being approached, “approach warning” is displayed in the combination meter and at the same time a warning chime sounds, and the brake is operated.

  • When it is further judged that the Nissan Murano vehicle or pedestrian may collide with the vehicle ahead, the system operates the brake strongly to avoid collision while it displays AEB warning on the combination meter and rings a warning chime.

Start of warning and partial brake Start of harder brake
Applies partial braking Harder brake
SituationBrakeWarning
No obstacle approached No operation —
Start of warning and partial brake
Partial brake
  • Sounds the buzzer

  • Blinks Nissan Murano vehicle ahead indicator

Start of harder brake

Harder brake

  • Sounds the buzzer

    (Higher pitched buzzer)

  • Indicates AEB warning

OPERATION DESCRIPTION

  • The distance sensor measures the distance from the vehicle ahead and transmits the distance sensor signal to the ADAS control unit.

  • The lane camera unit measures the distance from a pedestrian and transmits the pedestrian ahead signal to ADAS control unit.

  • The ADAS control unit judges the possibility of a collision from the distance sensor signal, the pedestrian ahead signal and the Nissan Murano vehicle speed.

  • The ADAS control unit performs the following operations according to the degree of possibility of a collision.

    • Transmits the driver assistance buzzer signal to the ADAS control and sounds the buzzer.

    • Transmits the meter display signal to the combination meter and displays AEB warning.

    • Transmits the brake fluid pressure control signal to the ABS actuator and electric unit (control unit) via chassis control module and performs the brake control

    • Transmits the stop lamp request signal to BCM and turns ON the stop lamp.

Operation Condition

ADAS control unit performs the control when the following conditions are satisfied.

  • When the AEB system setting on the integral switch is ON.

  • When the vehicle speed is above approximately 5 km/h. (For Nissan Murano vehicle)

  • When the vehicle speed is within the range of approximately 10 – 60 km/h. (For pedestrian)

  • There is a possibility of a collision with the Nissan Murano vehicle and pedestrian ahead.

No Operation Condition

The ADAS control unit is not operate when the system is under the conditions of the no operation condition.

  • When the AEB system setting on the integral switch is OFF.

  • When the vehicle and pedestrian ahead is not detected.

  • When the Nissan Murano vehicle speed is below approximately 10 km/h. (For pedestrian)

Warning Lamp/Indicator Lamp
NameDesignFunction
AEB warning lamp
  • For layout, refer to Design.