Body Exterior, Doors, Roof & Vehicle Security

System. Moonroof

~2min read
System Diagram
System Description

MOONROOF SYSTEM

INPUT/OUTPUT SIGNAL CHART

ItemInput signal to moonroof motor assemblyMoonroof motor functionActuator
Moonroof switch Moonroof signal (tilt up/ down or slide open/close) Receives signal and moves the moonroof and sunshade assembly to the correct position. Moonroof motor and/or Sunshade motor
Sunshade signal (slide open/close)
Combination meter Nissan Murano Vehicle speed signal Receives speed signal and determines the amount of torque the motor requires.
BCM RAP signal Retained power after the ignition switch is placed in the OFF position and the front doors remain closed.

MOONROOF AND SUNSHADE OPERATION

  • The moonroof motor assembly and sunshade motor assembly operate with the power supply that is output from the BCM while the ignition switch is ON or retained power is operating.

  • Tilt up/down & slide open/close signals from the moonroof switch and sunshade switch enable the moonroof motor and sunshade motor to move.

  • Moonroof motor assembly receives a Nissan Murano vehicle speed signal from the combination meter and controls the moonroof motor torque of tilt down at the time of high speed operation.

AUTO OPERATION

Moonroof and Sunshade AUTO feature makes it possible to slide open and slide closed the moonroof and sunshade without holding the moonroof switch and sunshade switch in the slide open/close position.

RETAINED POWER OPERATION

  • Retained power operation is an additional power supply function that enables the moonroof and sunshade system to operate for 45 seconds after the ignition switch is off and the front doors remain closed.

Retained power function cancel conditions:

  • Door CLOSE (door switch OFF)→OPEN (door switch ON).

  • When ignition switch is ON again.

  • When timer time passes (45 seconds).

ANTI-PINCH FUNCTION

The moonroof and sunshade motor’s built in CPU monitors the moonroof motor and sunshade motor operation and position.

If a restriction is detected during the slide closed operation the moonroof/sunshade motor will move the glass/sunshade into the open positions.